Front Panel; Air Filter - Mitsubishi Electric TRANE NTXWEL09A112A Series Operating Instructions Manual

● OPERATING INSTRUCTIONS ●
C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.

Front panel

Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the above illustration.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade before installing it.
3. Install the front panel by following the removal pro-
cedure in reverse. Close the front panel securely
and press the positions indicated by the arrows.
En-7
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not use water hotter than 120°F (50°C).
Air cleaning fi lter
(Anti-allergy Enzyme Filter, option)
Back side of air fi lter
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade.
Every year:
• Replace it with a new air cleaning fi lter for best
performance.
• Parts Number MAC-408FT-E
Air fi lter
Clean every 2 weeks
•
• Remove dirt by a vacuum cleaner, or rinse with water.
• Dry it well in shade before installing it.
Important
• Clean the fi lters regularly for best performance and to reduce
power consumption.
• Dirty fi lters cause condensation in the air conditioner which will
contribute to the growth of fungi such as mold. It is therefore rec-
ommended to clean air fi lters every 2 weeks.
Pull to remove from the air fi lter