Connecting Devices; Selecting Your Connection Quality; Connecting Your Devices - Emerson LC320EM3F Owner's Manual

7 Connecting devices

No supplied cables are used with these connections:
•
Please purchase the necessary cables at your local store.
Before you connect AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.

Selecting your connection quality

HDMI - Highest quality
Supports high-definition Digital signals and gives highest picture and
sound quality. Video and audio signals are combined in one cable.
You must use HDMI for full high-definition video and to enable
fun-Link (HDMI CEC).
Note
•
Emerson HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP
is a form of Digital Rights Management that protects high definition content in Blu-ray
discs or DVDs.
Component (Y Pb Pr) - High quality
Supports high-definition Analog signals but gives lower picture quality than
HDMI. Component (Y/Pb/Pr) Video cables combine red / green / blue
video cables with red / white audio (L/R) cables. Match the cable colors
when you connect to the TV.
Composite - Basic quality
For analog connections. Composite Video / Audio Analog cable usually
combine a yellow video cable with red / white audio (L/R) cables. With
this unit, yellow cable must be connected to Y (green) of Component
Video Input jacks.

Connecting your devices

HDMI Digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
Digital video and multi-channel Digital Audio through a single cable.
or
HDMI cable
HDMI-DVI Connection
This unit can be connected to your device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
audio cable for Analog Audio signal as well.
To HDMI 1
Input jack only
HDMI-DVI
conversion cable
Note
•
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
For HDMI connection
•
The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals, 32kHz
/ 44.1kHz and 48kHz of audio signals.
•
This unit accepts 5.1 channel audio signal (Dolby Digital) and 2 channel audio signal
(LPCM).
•
This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
•
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
•
HDMI-DVI connection requires separate audio connections as well and the audio
signals are output as Analog (L/R) Audio.
•
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
HDMI OUT
TITLE 5
CHAPTER 15
REPEAT A-B
Blu-ray / DVD recorder
with the HDMI output jack
cable receiver or satellite box with
the DVI output jack
STEREO
PCM
AUDIO OUT
DVI OUT
L R
audio cables
29
English