Microwave Drawer Disassembly - Sharp SMD3070ASY Service Manual

SMD3070ASY
WARNING: Follow all safety precautions as stated at the beginning of this Service
Manual before proceeding!
1. Open the Drawer to access the (4) mounting screws holding the
unit on to the wall or cabinet opening. (Fig 1).
2. Close Drawer and carefully pull the unit out from opening and
unplug the power supply cord. Place unit on a secured surface
to work on.
3. Remove the (2) screws holding AC Cord Mounting
Angle. Lift the mounting angle (with AC Cord attached)
and unplug AC Cord from molex. (Fig 2).
4. Remove the (18) screws holding the Control Panel Rear Cover, Outer
Case/Side Angles, then remove outer Case. (Fig 2).
5. Remove the (10) screws holding the Back Plate.
Cord Bushing
AC Cord
AC Cord
Mount Angle
Outer Case
Side Angle
NOTE: You now have access to all components of the Drawer.

MICROWAVE DRAWER DISASSEMBLY

Schematic Diagram
Knockout
for Oven lamp
Replacement
Latch Cover Plates
Back cover
Side Angle
Door
Frame
Assy
25
Fig. 1
Fig. 2
Cavity
Door Panel
SMD2470ASY