Table of Contents
Advertisement
Remote control (27" only)
R1 POWER
Turn the monitor on from stand-by or off to
stand-by mode.
R2 TV/AV
Select input signal source.
R3 MUTE(optional)
Mute or Unmute sound
R4 NUMBER Button
Press the buttons in order of MENU,7,8,9,0 to
unlock the remote control lock.(27" only)
R5 LAST CH
Not used.
R6 INFO
Information display.
R7 PICT MODE
Selects your preferred picture settings.
R8 SLEEP
Set the sleep timer.
R9 MENU
Display a main menu.
R10 EXIT
Turns the OSD window off and moves from
sub Menu to top menu in the OSD window.
R11/R17 UP/DOWN
Press UP/DOWN button to enter the Function
menu.
/
Button
R12/R14 LEFT/RIGHT
Press LEFT/RIGHT Button to adjust the
volume.
R13 OK
Select menu items.
R15 VOL +/- (optional)
Adjust the sound level.
R16 PR +/-
Not used.
R18 ADD/ERASE
Not used.
R19 PC
Select PC mode.
R20 AIR/CABLE
Not used.
R21 CC
Not used.
Inserting batteries into the remote control unit
Open the battery compartment of the remote
control. Insert the batteries (two 1.5 V type R03 or
AAA). Make sure that the polarity matches with the
(+) and (-) marks inside of the battery compartment.
Note: To avoid damage from possible battery
leakage, remove the batteries if you do not plan to
use the remote control handset for an extended
period of time.
Changing a monitor parameter
1. Press the MENU button on the front panel to
obtain the OSD menu screen.
2. Use UP-DOWN buttons to select the menu.
3. Use AUTO button to select the submenus.
4. Use Up-Down buttons to select a submenu
function.
5. Press AUTO/SELECT button, then using left-
right buttons you can make adjustments as
necessary
6. To exit, press MENU.
/
Button
5
Advertisement
Table of Contents
