Disassembling The Monitor; Assembling The Monitor (24",27"); Connections; Front Panel Controls - Ganz LED-19 User Manual

Disassembling the monitor

1. Put a smooth pad or cloth on a level surface.
Place the monitor on it facing downwards.
2. Detach the rear cover of the monitor stand with
a screw driver.
3. Remove the two screws connecting the stand
and monitor body.

Assembling the monitor (24",27")

1. Put a smooth pad or cloth on a level surface.
Place the monitor on it facing downwards.
2. Join the stand with the metal protrusion from
the bottom of the monitor's main body.
3. Tighten the screw fully at the bottom of the
stand by turning it clockwise three to four turns.
4. After fully tightening the screw, bend the knob
of the screw onto the bottom of the stand.
Caution : Incomplete tightening of the screw may
cause the monitor unstable.
Disassembling the monitor
1. Put a smooth pad or cloth on a level surface.
Place the monitor on it facing downwards.
2. Remove the four screws connecting the stand
rear body.
3. Remove the connecting stand front body.
Screw(x2)

Connections

(17",19"W,19",22",24")
(27")
1. AC IN(17",19"W,19",22",24")
DC 12V Input (27")
2. CAM OUT
Composite signal output
3. CAM IN
Composite signal input.
4. HDMI
HDMI signal input.
5. VGA
RGB signal input.

Front panel controls

Control panel

(17")

(19"W,22",24")

(27")
3