ACR Systems ACR 01-0194 Reference Manual page 14

TRH Data Loggers
9
Full.
Currently there is no compression method available for TRH-1000 loggers.
To set when the logger will start recording click on the Start Time field. Next, click on the
small button that appears at the right. This will pop up a form allowing you to set the date and
time. Highlight the date or time and enter the appropriate value. You can also click on the
drop-down list arrow to bring up a calendar. You can set the logger's starting time for just
over 65535*8 seconds (6 days, 1 hour, 38 minutes) ahead of the current time. Note that the
start time will default to the closest time sampling within 8 seconds of the selected time.
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
1.800.561.8187 information@itm.com
www. .com