Compaq Presario,Presario 1203 Supplementary Manual page 55

W Me O S
INDOWS PERATING YSTEM
7. The QuickRestore PowerQuest screen displays, then begins
to copy files from the QuickRestore CD to your hard drive.
This process may take some time. When all files have copied,
your computer will restart automatically.
8. After the computer has restarted, you will be prompted to
insert the second QuickRestore CD. Replace the first
QuickRestore CD with the second QuickRestore CD, then
press Enter. The Verify Media Status screen displays.
9. When the QuickRestore process is complete, the CD will
automatically eject from the drive. Remove the CD from the
drive and press Enter.
10. Your computer will automatically restart. You may see a
New Hardware Detected screen, although in many cases, this
will not occur. If you do receive a New Hardware Detected
screen, depending upon the type of hardware found, a reboot
may follow.
11. When the owner registration information screens display,
complete the prompted information.
Using the QuickRestore CD with a
Replacement Hard Drive
If your original hard drive is damaged or has been replaced with
a new one, complete the following steps to use the QuickRestore
CD:
1. Insert the first QuickRestore CD into your CD, DVD, or CD-
RW drive.
2. Turn your Notebook off using the power switch.
3. Turn your Notebook on using the power switch.
4. The QuickRestore splash screen displays and blinks. When
the screen ceases to blink and displays the Language
Selection screen, select a language.
M
ANUAL
C Q R 3-19
OMPAQ UICK ESTORE