Turning On Your Tv For The First Time - Toshiba 55L510U18 Manual

32L310U18 / 49L510U18 / 55L510U18 32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
Turning on your TV for the
first time
The first time you turn on your TV, the Initial Setup
wizard opens. The wizard guides you through setting
up basic settings including the menu language, time
zone, Store or Home mode, TV signal source, and the
channel list.
Note
You must select a voice guide setting, a
language, time zone, and Home or Store
mode. You cannot exit the Initial Setup
wizard until you make these selections.
1 Make sure that you have:
• Installed the remote control batteries. (See
page 36.)
• Connected an antenna, cable TV, or satellite TV.
(See page 19
• Connected the power cord. (See page 35.)
2 Press
(power) to turn on your TV. The Initial
Setup wizard opens.
3 Press to select Yes (to turn on the Voice
or
Guide) or No (to turn off the Voice Guide), then
press ENTER.
4 Press or to highlight a language. Press
to highlight Time Zone, press
time zone, then press ENTER.
38
through 23.)
or to select your
5 Press
then press ENTER.
For normal home use, you should select Home
mode. If you select Store mode, every time you
turn on your TV, it will be in Store mode. Store
mode is not an energy savings mode.
6 Press
press ENTER.
7 If you are using an antenna or connecting a cable
box directly to a wall jack, press ENTER again. Your
TV starts scanning for channels available in your
viewing area.
OR
If you connected a cable box or a satellite box,
press EXIT to close the wizard. You do not need to
scan for channels.
After the wizard closes, the Auto Tuning (Antenna)
menu opens with the first found channel
highlighted.
8 Press EXIT to close the menu.
or
www.tv.toshiba.com
to highlight Home or Store mode,
or
or to highlight Antenna or Cable, then