Table of Contents
Advertisement
Preparation
Unpack the test
Open the tap and
strip.
let the water flow for
approx. 1 minute.
After detecting the water hardness:
1. After switching on your machine, press and hold the Menu key for 3 seconds.
C
Some models require pressing
Menu key once to enter settings
menu.
2. Using <- and +> keys, proceed until the water hardness setting indicator becomes on ("r"
position will be displayed).
3. Using the Selection key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see "Water hardness level setting table".
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
Perform the same hardness level adjustment that you have set on the control panel also
with the regeneration adjustment switch. For example, if you have adjusted to "3" in the
control panel, also set the regeneration adjustment switch to 3.
Regeneration Adjustment Switch
Dishwasher / User's Manual
Dip in the test strip
into the water for 1
second.
German Water
French* Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
Level 0
1
Take out the strip
Wait for 1 minute.
from the water and
shake it.
Water Hardness Level Indicator
Press the Selection key to switch the water hardness level
to position 1. (r1)
Press the Selection key to switch the water hardness level
to position 2. (r2)
Press the Selection key to switch the water hardness level
to position 3. (r3)
Press the Selection key to switch the water hardness level
to position 4. (r4)
Press the Selection key to switch the water hardness level
to position 5. (r5)
Level 1
Level 2
Level 3
1
2
Make the necessary
adjustment
according to the test
strip.
Level 4
Level 5
3
4
5
13 / 45 EN
Advertisement
Table of Contents
