Table of Contents
Advertisement
7.1. Changing a programme
When you want to change the wash
programme after another programme has
already started:
Press the Start/Pause button.
Once the program has stopped, use
the programme selection button to se-
lect the desired programme.
Press the Start/Pause button to start
the newly selected programme.
The newly selected programme will
continue in the place of the previous
programme.
7.2. Cancelling a programme
When you want to cancel and stop a wash
programme after another programme has
already started:
Press and hold the Start/Pause
button for 3 seconds.
End light will flash during the cancelling pro-
cess. The machine will drain the water inside
for about 30 seconds.
When the End light turns on, the
programme has been cancelled.
7.3. Switching the Machine Off
Pull the plug out of the outlet.
Turn off the water tap.
Switch your machine off with the On/
Off button after the programme has
ended and the End light turns on.
NOTE: Do not open the door until the
programme finishes.
NOTE: At the end of the washing pro-
gramme, you can leave the door of the ma-
chine ajar to speed up the drying process.
NOTE: If you open the door of the ma-
chine or if power gets cut during the wash-
ing cycle, the programme will resume once
the door has been closed or the power has
recovered.
EN - 19
Advertisement
Table of Contents
