Traxxas Top Qualifier 6509R Owner's Manual page 7

USING THE RADIO SYSTEM
Before installing the TQi radio system in your model, make certain
the steering trim knob is centered. After you have installed and
bound the radio system, confirm the steering servo and throttle servo
(if installed) operate properly: turning the steering wheel right makes
the front wheels turn right (and vice-versa), and pulling the trigger
to the grip opens the throttle of your nitro engine. If either control
operates "backwards," follow the menu tree on page 16 or use the
Traxxas Link App to reverse the servo's operation.
After confirming correct servo operation, turn off TSM (see page 8) and
use the TQi's steering trim knob to center your model's front wheels so
it drives straight with the steering wheel at its neutral position; then,
return the multi-function knob to the desired TSM setting.
If there is not enough adjustment to achieve this with the steering trim
knob, reset the steering trim to its center position, then remove and
reinstall the servo's steering horn to center the steering system as close
as possible. The steering trim knob can now be used to make the final
adjustments.
Repeat this process for the throttle servo. To access throttle trim, follow
the steps in the menu tree on page 16.
If your model is equipped with an electronic speed control, it will
have to be calibrated to the TQi radio system. Follow the instructions
included with your vehicle or your speed control to calibrate it properly.
Range-Testing the Radio System
Before each running session with your model, you should range-test
your radio system to ensure that it operates properly.
1. T urn on the radio system and check its operation as described in the
previous section.
2. H ave a friend hold the model. Make sure hands and clothing are
clear of the wheels and other moving parts on the model.
3. W alk away from the model with the transmitter until you reach the
farthest distance you plan to operate the model.
4. O perate the controls on the transmitter once again to be sure that
the model responds correctly.
5. D o not attempt to operate the model if there is any problem with
the radio system or any external interference with your radio signal
at your location.
Higher Speeds Require Greater Distance
The faster you drive your model, the more quickly it will near the limit
of radio range. At 60mph, a model can cover 88 feet every second! It's
a thrill, but use caution to keep your model in range. If you want to see
your model achieve its maximum speed, it is best to position yourself
in the middle of the model's running area, not the far end, so you drive
the model towards and past your position. In addition to maximizing
the radio's range, this technique will keep your model closer to you,
making it easier to see and control.
No matter how fast or far you drive your model, always leave
adequate space between you, the model, and others. Never drive
directly toward yourself or others.
TQ RADIO SYSTEM • 7
i