Table of Contents
Advertisement
Activating/deactivating music on hold
You can set that your external participant hears music in case of internal recall and during call transfer.
¤
P#Q5#1M
§Menu§
Repeater mode
With a repeater, you can increase the range of your base station. You will need to activate repeater mode (
Repeater mode and No Radiation mode (
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
registration to the base station will be retained.
¤
¤
q
§Menu§
Settings
Restoring the base station
When restoring factory settings:
◆
Individual settings are reset.
◆
All lists are deleted.
◆
The No Radiation mode is deactivated.
The date and time are retained. The answering machine is ready for use approx. 15 seconds after the base station has
been reset.
Resetting the base station via the menu
When resetting via the menu
◆
Handsets are still registered.
◆
The system PIN is not reset.
¤
¤
q
§Menu§
Settings
Resetting the base station using the key on the base station
When resetting the base station using the key on the base station
◆
All handsets are de-registered and
◆
The system PIN is reset to the original code 0000.
¢
Carry out the following steps: Remove the mains cable from the base station. Hold down the registration/paging key
on the base station (
for at least 5 seconds.
¤
The number for the current setting flashes: 0 = off; 1 = on
¢
page 23) cancel each other out.
¤
¤
q
§§OK§§
§§OK§§
Handset
¤
¤
¤
q
§OK§
§OK§
Base
page 1) and reconnect the power cable to the base station at the same time. Hold the key down
15
¤
q
Reset Handset
¤
¤
q
§OK§
Base Reset
¤
¤
¤
§§OK§§
§§OK§§
Reset?
¤
§OK§
Reset?
¤
¤
§OK§
enter number
.
¢
page 23).
Advertisement
Table of Contents
