Summary of Contents for Hydrofarm ActiveAqua AACH10HP
Page 1
INSTRUCTIONS WATER CHILLERS AACH10HP AACH25HP AACH50HP AACH100HP...
Page 2
INSTRUCTIONS AACH10HP CHILLER: 1/10 HP (10-40 GALLON) www.Hydrofarm.com...
Page 3
4. When there is not enough circulation in a room, the refrigeration efficiency is reduced. *The BTU is measured at an ambient temperature of 97°F (36°C) and the chiller is working at 1100W/9.6A power. Recommended pump: Hydrofarm AAPW160 OR AAPW250 OR AAPW400...
Page 4
INSTRUCTIONS AACH25HP CHILLER: 1/4 HP (26-80 GALLON) www.Hydrofarm.com...
Page 5
4. When there is not enough circulation in a room, the refrigeration efficiency is reduced. *The BTU is measured at an ambient temperature of 97°F (36°C) and the chiller is working at 1100W/9.6A power. Recommended pump: Hydrofarm AAPW250 or AAPW550 or AAPW800...
Page 6
INSTRUCTIONS AACH50HP CHILLER: 1/2 HP (52-132 GALLON) www.Hydrofarm.com...
Page 7
4. When there is not enough circulation in a room, the refrigeration efficiency is reduced. *The BTU is measured at an ambient temperature of 97°F (36°C) and the chiller is working at 1100W/9.6A power. Recommended pump: Hydrofarm AAPW800 or AAPW1000 or AAPC1010...
Page 8
INSTRUCTIONS AACH100HP CHILLER: 1 HP (80-250 GALLON) www.Hydrofarm.com...
Page 9
4. When there is not enough circulation in a room, the refrigeration efficiency is reduced. *The BTU is measured at an ambient temperature of 97°F (36°C) and the chiller is working at 1100W/9.6A power. Recommended pump: Hydrofarm AAPW1010 or AAPC1010 or AAPC1020 or AAPC20...
• Temperature memory system that allows the chiller to refrigerate continuously according to the previous temperature setting • Boost function accelerates the chilling process with two available options: 2-hour expedited chilling and continuous (24 hrs/day, 7 days/week) maximum chilling. www.Hydrofarm.com...
INSTRUCTIONS INTRODUCTION Thank you for purchasing the Active Aqua Series Chiller. The chiller represents a significant step forward in horticultural chiller engineering, offering state of the art technology at highly competitive prices. With this chiller, water temperatures for reservoirs can be quickly and economically maintained.
Page 12
The inflow should connect the chiller to the appropriate sized submersible water pump, such as an Active Aqua Water Pump, in the proper sized reservoir (see attached performance curve chart). The outflow tube should hang freely in the reservoir to re-introduce the chilled water back into the holding tank. www.Hydrofarm.com...
INSTRUCTIONS NOTE: Please note that the filter (with the pump) must be located below the reservoir water level. If you wish to place the unit at the side of the reservoir, you must fill the filtration system with water before turning it on. OPERATION 1.
Note: Do NOT use soap or detergents for cleaning the internal components of the chiller system. 1. Disconnect the chiller and submersible water pump from the power supply. 2. Clean off the pump with a high powered hose or sprayer to remove debris and dirt from the pre- www.Hydrofarm.com...
INSTRUCTIONS filter and housing. Clean the pre-filter as well if one is used. 3. Reconnect the pump to the chiller inflow tubing and place it in a clean reservoir. 4. Fill the reservoir with clean water and a flushing agent formulated to remove salt deposits and excess nutrients from the plant system and grow medium (available at most indoor gardening and hydroponic retailers).
Hydrofarm’s warranty liability extends only to the replacement cost of the product. Hydrofarm will not be liable for any consequential, indirect, or incidental damages of any kind, including lost revenues, lost profits, or other losses in connection with the product. Some states do not allow limitation on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Need help?
Do you have a question about the ActiveAqua AACH10HP and is the answer not in the manual?
Questions and answers