Table of Contents
Advertisement
Installation
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the VGA (optional) and/or HDMI (optional) input socket of the monitor, and the VGA
(optional) and/or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews
on the signal cable connector.
3.
Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with
the audio cable.
4.
Insert the monitor power cable into the power port at the back of the monitor.
5.
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
VGA
VGA
Advertisement
Table of Contents
