Vivotek FD9369 User Manual page 419

© 2020 VIVOTEK INC. All Right Reserved
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>:<port>/media2/<streamprofile_i<0~(n-1)>_profilename>.sdp?[<parameter>=
<value>]
"n" is the maximum stream profile number (capability_media_streamprofiles_num)

"streamprofile_i<x>_profilename" is a friendly name for certain profile, x is within

0~(capability_media_streamprofiles_num)-1.
port is the http port.

Please refer to the streamprofile group for requesting the stream profile name value for each
profile.
You can get the SDP by HTTP GET.
When using scalable multicast, Get SDP file which contains the multicast information via HTTP.
PARAMETER VALUE
pimssm 1
Note:
1. This method is only valid when always multicast is enabled, i.e.
streamprofile_i<x>_alwaysmulticast=1.
2. If the requested certain streamprofile_i<x>_profilename is empty, which indicates stream profile
<x> doesn't have a valid SDP file, the above method of requesting SDP file will fail.
3. If there existed two or more streamprofile_i<x>_profilename which have the same value, the
requested SDP file will be overwrite by the last request.
8.40 Accessing SFTP server and client
8.40.1 SFTP server setting for event action
* Only available when bit 1 of "capability_protocol_ftp_client" is 1.
(for control API)
Syntax:
DESCRIPTION
1: Enable the feature of Protocol
Independent Multicast - Source
Specific Multicast.
* This field is only required when
using PIM-SSM feature.
* Only valid when
network_rtsp_pimssm_enable=1.
VIVOTEK
295
User's Manual - 419