Table of Contents
Advertisement
VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
NAME
idleaction_interval
P
PTZ C
LEASE REFER TO
7.41 Camera PTZ Control (SD Series)
Group: camctrl_c<0~(n-1)> for n channel products
bit4 of capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
focusmode
356 - User's Manual
VALUE
1~999
API
ONTROL
VALUE
string[16]
string[16]
1 ~ 255
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
auto,onetimeauto,sp
otlight,manual
SECURITY
DESCRIPTION
(get/set)
should be taken while idle.
1/4
While idle over this time interval, idle
action will be taken.
(the bit7 of capability_ptzenabled is 0 and the
SECURITY
DESCRIPTION
(get/set)
6/7
(Internal used, read only)
6/7
(Internal used, read only)
1/4
Camera ID controlling external
PTZ camera.
Note:
Please set your speed dome to
the appropriate baud rate, and
Camera ID, e.g. 2400bps, camera
ID 1,2,3,,,,etc.
All Camera IDs on the same
controlling system (NVR or rs485
keyboard) have to be distinct.
Therefore, once you send a
controlling signal, each camera
will only accept the inputs with
the corresponding ID.
1/4
Pan speed
1/4
Tilt speed
1/4
Zoom speed
1/4
Auto pan speed
1/4
Auto focus speed
1/4
Indicate the focus control mode.
232
Advertisement
Table of Contents
