Gigabyte GA-X170-WS ECC User Manual page 78

2. Select USB Flash Drive.
3. Select the BIOS update file.
Make sure the BIOS update file matches your motherboard model.
Step 2:
The screen will show that the BIOS file is being read from your USB flash drive. Please select Quick Update or
Normal Update to begin the BIOS update. The screen will then display the update process.
• Do not turn off or restart the system when the system is reading/updating the BIOS.
• Do not remove the USB flash drive or hard drive when the system is updating the BIOS.
Step 3:
The system will restart after the update process is complete.
Step 4:
During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults on the Save & Exit
screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update,
so we recommend that you reload BIOS defaults.
Step 5:
Select Save & Exit Setup and press <Enter>. And then select Yes to save settings to CMOS and exit BIOS
Setup. The procedure is complete after the system restarts.
Unique Features
Q-Flash
Model Name : X170-WS ECC
BIOS Version : F1
BIOS Date : 05/20/2016
Update BIOS From Drive
Flash Type/Size : MXIC 25L/U Series 16MB
Please select drvice
Update BIOS From Drive
USB Flash Drive
Save BIOS to Drive
Exit Q-FLASH
Close
Select Yes to load BIOS defaults
- 78 -