Cycle Guide - Whirlpool WED4915EW1 Use And Care Manual

CYCLE GUIDE — ACCUDRY
Not all cycles and settings are available on all models.
ACCUDRY™ - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Choose ENERGY PREFERRED cycle for optimal energy savings.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More or Very Dry next time you dry a similar load. If loads seem drier
than you like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control.
Items to dry:
Large or heavy items
such as thick towels or
robes
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
6
/AUTOMATIC DRY CYCLES
™
Cycle: Temperature:
Jeans, More, or High
Very Dry
Energy Preferred Medium
Delicate or Less Dry Low
Cycle: Temperature:
Heavy Dry Any
Damp Dry Any
Fluff Air No Heat
Available
Options:
Wrinkle Shield™ Automatic cycles give the best drying
in the shortest time. Drying time varies
Temperature
based on fabric type, load size, and
Cycle Signal
dryness setting.
Select a drying temperature based on
Wrinkle Shield™
the fabrics in your load. If you are unsure
Temperature
of the temperature to select for a load,
Cycle Signal
select the lower setting rather than the
higher setting.
Wrinkle Shield™
Temperature
Cycle Signal
Available
Options:
Temperature Choose high to dry large or heavy loads.
Temperature Dries items to a damp level or for items
that do not require an entire drying
cycle.
Temperature
No heat drying.
Use the No Heat setting for foam, rubber, plastic, or heat-
sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: