Compaq Armada 1700 Reference Manual page 75

Some data or fax communications software prompts you for
specific information about the model of modem you are using. In
this case, if the internal modem is not available as a choice, select
one of the following modems: Compaq Modem or Hayes
Compatible.
Choosing another modem does not affect the actual
connection speed of the modem.
Use the following information if required for modem setup:
COM port setting
DCE Speed
DTE Speed
Data Format
Data Format
Data F ormat
Dial Command
AutoAnswer Command
Sound
Columns
Local Echo
A result code is a modem response to an issued command. The
screen displays the result code in one of two formats: the long
form, also known as verbose, or numeric characters represented by
digits. A typical example of a result code could be CONNECT
33600. This message is the modem's acknowledgement that it has
established a connection at transfer rate of 33,600 bps.
The following is a table of supported modem result codes and
definitions.
COM2
56 Kbps
115.2 Kbps
Databits - 8
Parity - N
Stopbits - 1
ATDT
ATS0 = 1
Enabled
80
Enabled