Compaq Armada 1700 Reference Manual page 155

Modem loses
connection
The connection from
the phone line to the
modem is loose.
Call Waiting has not
been disabled.
Hibernation was
initiated or a low-
battery condition
occurred.
Disconnect, then
reconnect the phone
cable. Reestablish
connection.
To disable Call Waiting:
1. Click Start, Control
Panel, double-click
Modems.
2. From the General
tab of the Modems
Properties page,
click Dialing
Properties.
3. From the My
Location tab of the
Dialing Properties
page, check the box
labeled "This
location has call
waiting." Then select
*70, 70#, or 1170
from the drop-down
list to disable call
waiting for your
dialing area.
Restart the
communications
software to restore
the original modem
settings after exiting
Hibernation or resolving
the low-battery condition.
Troubleshooting
Continued