Basic Operations; Switching Power On/ Off; Adjusting The Volume; Selecting A Zone And Channel - Kenwood NX-1200A User Manual

SWITCHING POWER ON/ OFF

Turn the Power switch/ Volume control clockwise to switch the transceiver power
ON.
• The Power on text appears if the Power on text has been set.
Turn the Power switch/ Volume control counterclockwise to switch the transceiver
power OFF.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.
Rotate clockwise to increase the volume and counterclockwise to decrease the
volume.

SELECTING A ZONE AND CHANNEL

1 Select the desired zone using the Selector (programmed as [Zone Up/Down]
or [Zone Select]) or buttons programmed as [Zone Up]/ [Zone Down].
• Each zone contains a group of channels.
2 Select the desired channel using the Selector (programmed as [Channel
Up/Down] or [Channel Select]) or buttons programmed as [Channel Up]/
[Channel Down].
• Each channel is programmed with settings for transmitting and receiving.
• The transceiver may have names programmed for zones and channels.
The zone name and channel name can contain up to 8 characters
respectively. While selecting a zone, the zone name appears for 2 seconds
(if Zone Name Display is set), then channel name appears.

BASIC OPERATIONS

12