Table of Contents
Advertisement
Use the following procedure to insert or remove a CD-ROM.
1. Turn on the notebook.
2. Push the eject button Ê and the CD-ROM tray will slide out. If the tray only
slides out partially, gently pull it until fully extended.
3. To insert a CD-ROM, place the CD-ROM in the tray with its label facing up.
To remove a CD-ROM, hold the disc by its outer edge and lift it up from the
tray
4. Slide the tray back into the drive bay.
Manually Releasing a CD-ROM
In the unlikely event that you are unable to release the CD-ROM tray by pressing
the eject button, you can manually release the tray as follows:
1. Turn off the system.
2. Insert a small rod into the manual eject hole Ë (see Figure 2-3) and push
firmly to release the tray.
3. Pull the tray out until the tray is fully extended, then remove the CD-ROM.
2-4
Figure 2-3. Inserting a CD-ROM
2
1
Using the Notebook
Advertisement
Table of Contents
