Table of Contents
Advertisement
& Memory Enhancement Settings
Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal,
Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default: Auto)
& Memory Channel Detection Message
Allows you to determine whether to show an alert message when the memory is not installed in the optimal
memory channel. (Default: Enabled)
ƒ SPD Info
Displays information on the installed memory.
ƒ Memory Channels Timings
d Channels Standard Timing Control, Channels Advanced Timing Control, Channels
Misc Timing Control
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
& Vcore Volatge Mode/CPU Vcore/Dynamic Vcore(DVID)/BCLK Adaptive Voltage/CPU
Graphics Voltage (VAXG)/DRAM Voltage (CH A/B)/CPU VCCIO/CPU VCCIO2/CPU
System Agent Voltage/VCCPLL OC/VCC18 PCH/VCC1V8P
These items allow you to adjust the CPU Vcore and memory voltages.
ƒ Advanced Voltage Settings
This submenu allows you to configure Load-Line Calibration level, over-voltage protection level, and over-
current protection level.
- 29 -
Advertisement
Table of Contents
