Table of Contents
Advertisement
S _
8) M2P_CPU
The M.2 connector supports M.2 SATA SSDs or M.2 PCIe SSDs.
M2P_CPU
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Locate the proper mounting hole for the M.2 SSD to be installed and then install the mounting clip first.
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it by pressing the clip pin into the mounting hole.
(Note)
9) F_AUDIO (Front Panel Audio Header)
The front panel audio header supports High Definition audio (HD). You may connect your chassis front
panel audio module to this header. Make sure the wire assignments of the module connector match the
pin assignments of the motherboard header. Incorrect connection between the module connector and the
motherboard header will make the device unable to work or even damage it.
9
10
_ F
/M2A_SB (M.2 Socket 3 Connectors)
(Note)
_ 0
F
(Note)
80
60
_3
U
Select the proper hole for the mounting clip according to the length of the M.2 SSD to be installed.
Supported by 11th Generation processors only.
Pin No. Definition
1
MIC2_L
1
2
2
GND
3
MIC2_R
4
NC
5
LINE2_R
Some chassis provide a front panel audio module that has separated connectors on each wire
instead of a single plug. For information about connecting the front panel audio module that has
different wire assignments, please contact the chassis manufacturer.
60
80
M2A_SB
Pin No. Definition
6
Sense
7
FAUDIO_JD
8
No Pin
9
LINE2_L
10
Sense
- 16 -
Advertisement
Table of Contents
