All manuals and user guides at all-guides.com
VCR SETUP
To avoid picture noise ( interference ) , leave an adequate distance between the VCR and TV.
■
Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
■
of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on
the screen. This phenomenon is common to all TVs and is not covered by warranty.
Antenna Connection
1. How to connect
Connect the RF antenna out socket of the
1
VCR to the
ANTENNA IN
TV.
2
Connect the antenna cable to the RF
antenna in socket of the VCR.
2. How to use
Set VCR output switch to 3 or 4 and then
■
tune TV to the same channel number.
■
Insert a video tape into the VCR and press
PLAY on the VCR. ( Refer to the VCR owner's
manual. )
socket on the
S-VIDEO
VIDEO
OUTPUT
SWITCH
Wall Jack
Antenna
ANTENNA IN
1
ANT OUT
L
R
ANT IN
2
21