Chicago Electric 66910 Set Up And Operating Instructions Manual page 8

Phase 2
Carefully place motor assembly on floor
2a.
with Main Housing (14) facing down.
Main Housing may bend if dropped.
2b. Flip Leg assembly over, and squeeze
legs together to allow them to be inserted
into motor assembly. Line up the holes
at the top of the Legs with the holes on
the motor assembly.
B
Page 8 For technical questions, please call 1-800-444-3353.
Insert all four Bolts (64) through the
2c.
sides of the motor assembly and the
Leg assembly. Secure with one Curved
Washer (27) and Lock Nut (75) each.
2d. With assistance, turn the assembly back
over. Tighten all Bolts (28, 32, 64) and
Lock Nuts (75), including the ones left
loose from Phase 1.
B
C
75
27
B
C
64
B
C
14
SKU 66910
a
REV 10h