Advertisement
Placement
Standing
Other Accessories
USB Magnetic Charging Cable
Hanging
Quick Start Guide
(Printed inside the accessory box)
Using icee™
The unique silicone cleansing bristles of Icee™ can be used with all skin types and provides targeted solutions
for different cleansing areas on the face. It is recommended to use Icee™ at least once a day to thoroughly
clean your face. The usage frequency of each function can be adjusted depending on your skin condition.
Before you start, please study the following important information:
Charge your Icee™ until the battery is fully charged. Please consult the "Charging" section in this manual
·
for more information.
Before initial use, unlock the Icee™ by pressing the cooling function button and cleansing function button
·
simultaneously for two seconds.
icee™ is equipped with a convenient strap that allows you to hang it anywhere, when the strap is not at-
·
tached, icee™ can stand upright.
Please test the product first on the back of your hand before using it, to confirm that no abnormalities occur.
·
If you notice any redness, swelling, itch or other abnormalities on your skin, discontinue use immediately
·
and consult a physician.
To protect the health of the skin, we do not recommend sharing your icee™ with anyone else or using icee™
·
on other areas than the face.
Description of modes
Simultaneously press the "Cooling button"
and the "Cleansing button"
1 .
unlock the icee™. The lock and unlock modes are confirmed through a short vibration and one flash of the
indicator light.
2.
Press the "Cooling button"
to start the ice-cold cooling mode of icee™. The indicator light will con-
tinuously fade from dark to bright to indicate the mode has started. Press the button again to disable the
cooling mode.
3.
Press the "Cleansing button"
to start the cleansing mode of icee™. The indicator light will flash quickly
to indicate the cleansing mode has started. Press the button again within 10 seconds to adjust the cleans-
ing intensity. Two intensity settings are available, the first intensity is meant for gentle skin cleansing, while
the second one is for deep skin cleansing. Each time the intensity changes, the indicator light will flash to
confirm the choice. After using a setting for more than 10 seconds, the intensity setting will be stored as
preferred intensity within the intelligent memory function. When pressing the "Cleansing button" again,
the cleansing mode will be disabled. Upon next usage, the cleansing mode will automatically start with the
stored preferred intensity setting.
Pay attention:
The standard duration of the ice-cold cooling mode is 1.5 minutes. After the time has passed, the device will
vibrate shortly as a reminder and disable the mode automatically. If you would like to continue to use the
ice-cold cooling mode, you can enable the mode by pressing the button again.
*
When the icee™ is running low on battery, the ice-cold cooling mode will be automatically disabled. For fur-
ther details, please consult the "Charging" section in this manual.
*
Please turn off and restart the cleansing mode to reset the preferred intensity setting from the intelligent
memory function. This action will restart the 10 seconds intensity adjustment time. During the intensity ad-
justment time, the "Cleansing button" can be pressed to cycle through the three settings: "gentle skin
cleansing" → "deep skin cleansing" → "OFF".
for 2 seconds to lock or
Advertisement
