Table of Contents
Advertisement
Usage:
The unique silicone cleansing bristles of Ada Pro can be used with all types of skin and provides targeted
solu�ons for different cleansing areas on the face. The IntelliTemp hea�ng and cooling func�ons can
contribute to a be�er skincare. It is recommended to use Ada Pro
morning and a complete cleansing rou�ne in the evening. The usage frequency of each func�on can be
adjusted depending on your skin condi�on. Before you start, please study the following important informa�on:
·
Charge your Ada Pro un�l the ba�ery is fully charged. Please consult the "Charging" sec�on in this manual
for more informa�on.
·
Before ini�al use, unlock the Ada Pro by pressing the cleansing bu�on and massage bu�on simultaneously（
a short vibra�on and one flash of the indicator light will be given when the product is unlocked).
·
If you have a sensi�ve skin or skin allergies, please test the product first on the back of your hand to confirm
that no abnormali�es occur.
·
If you no�ce any redness, swelling, itch or other abnormali�es on your skin, discon�nue use immediately
and consult a physician.
·
We do not recommend sharing your Ada Pro with anyone else or using Ada Pro on other areas than the
face.
Descrip�on of modes:
1. Press the "Hea�ng bu�on" to start the hea�ng mode of Ada Pro . The indicator light will con�nuously fade
from dark to bright to indicate the mode has started, and the dual-temp head will begin to heat-up. Press
the bu�on again to disable the hea�ng func�on.
2. Press the "Cleansing bu�on" to start the cleansing mode of Ada Pro . The indicator light will flash quickly
to indicate the cleansing mode has started. Press the bu�on again within 10 seconds to adjust the cleansing
intensity and choose between a total of three intensity se�ngs. Each �me a new intensity is selected, the
indicator lighted flashes to confirm the choice. A�er using an intensity se�ng for more than 10 seconds,
the intensity se�ng will be stored as preferred intensity using the intelligent memory func�on. When pressing
the "Cleansing bu�on" again, the cleansing mode will be disabled. Upon next usage, the cleansing mode will
automa�cally start with the stored preferred intensity se�ng.
3. Press the "Massage bu�on" to start the massage mode of Ada Pro
indicate the mode has started. Press the bu�on again to disable the massage mode.
4. Press the "Cooling bu�on" to start the cooling mode of Ada Pro . The indicator light will con�nuously fade
from bright to dark to indicate the mode has started. Press the bu�on again to disable the cooling mode.
5. Simultaneously press the "Cleansing bu�on" and the "Massage bu�on" for 2 seconds to enable or disable
the self-lock mode. The self-lock mode is confirmed through a short vibra�on and one flash of the indicator
light. The device will also confirm disabling of the self-lock feature through a short vibra�on and one flash
of the indicator light.
Description of modes:
* When star�ng the hea�ng or cooling mode it will be enabled for 1.5 minutes. A�er the �me has passed, the
device will vibrate shortly as a reminder and disable the mode automa�cally. If you would like to con�nue to
use the hea�ng or cooling mode, you can enable the mode by pressing the bu�on again.
TM
TM
TM
TM
every day for a simple cleansing in the
TM
TM
TM
TM
TM
TM
. The indicator light flashes once to
Advertisement
Table of Contents
