Godo DIGIPASS DP310 Instructions Manual page 9

Activate your Digipass
Follow the steps below to prepare the Digipass for use:
1. Turn on your Digipass by pressing the OK key. The
message "INITIAL PIN" appears.
2. Enter the 4-digit PIN code "0000" and press the
OK key. The message "NEW PIN" appears.
3. Then enter your personal 4-digit PIN code and
press the OK key.
The message "REPEAT PIN" appears.
4. Enter the same PIN again and press the OK key.
The message OK appears when the Digipass has
accepted your PIN code.
5. Then choose the language (English or Dutch) and
press the OK key.