Operation; Product Parts; Maintenance - TESY AC 37 HCICH Usage And Storage Instructions

• Do not clean and reuse composite filters
• Be careful when cleaning the air purifier. A highly
corrosive cleaning agent can damage the surface of the
unit.
• Do not use alcohol or organic solvent to wipe it,
otherwise it will damage the product or cause electric
shock, fire, etc.
INTRODUCTION
Congratulations on your choice of TESY Air Cleaner.
We highly recommend that you operate the Air Cleaner 24
hours a day, because indoor air can be quickly contaminated
by activity or objects in a room and infiltration of outside
air. Portable air cleaners are much more effective in rooms
where all doors and windows are closed.
The appliance will give you long-lasting service if operated
and taken care of correctly in accordance with these
instructions.

PRODUCT PARTS

Display Screen
Operation Buttons
Left Side
Handle
Sensor
Front Panel
Cover
One full set filters
Nylon pre-filter
Filter 3 in 1:
- НЕРА filter
- Activated Carbon
- Filter - Cold catalyst
Humidity filter
Note: Before use remove the protection polyethylene
envelope above the filters.
English

OPERATION

After power on,machine entry to the standby state,
"Power" button light shows red.
ON/OFF
SLEEP
SPEED
TIMER
AUTO
The Outlet
FILTER
Right Side
Handle
+
SLEEP SPEED
Back Panel
Cover

MAINTENANCE

Water Tank
Note: Please use a damp cloth stained with a little
detergent water to clean the machine surface periodically,
and to clean the air inlet and outlet with a soft brush.
Body cleaning
1 pc
1 pc
1 pc
Touch Power button slightly,you can turn on
/off .
Touch SLEEP Button slightly,enter to sleep
mode. Press any button to turn off the sleep
mode when under sleep mode.
When sleep mode, only "SLEEP" button light,
other buttons are off light.
Press "SPEED" button to adjust the fan speed.
Touch TIMER button slightly to set the
timing,digital screen show 0H to 12H.0H means
no setting. Under water shortage status, long
press TIMER + AUTO for 3s can cancel WATER
reminder lamp flashing.
Press "AUTO" button, on/off the auto mode.
When under auto mode, the device will be
adjustment the fan speed (1-4speeds) auto-
matically according to the air quality. Touch the
button again will exit the auto mode.
When the Filter replacement indicator flashes,
the unit tells you it is time to replace filter, and
long press FILTER button for 3s to reset the filter
time.
Press SLEEP+SPEED button 3S,turn on /
off child lock mode, When under child lock
mode, other buttons are not working.
Instructions for use and maintenance
EN
9