SECTION 2 DISASSEMBLY PROCEDURES
1. Preparations
Note:① The picture is from design model and may not 100 percent match the final end products,but the
operating process is the same. Make sure the wiring will remain the same as you
② Open the Monitor set, wrong wiring may cause safety issue.
③ All electric parts need to handle with ESD measures, ESD glove/ wrist strip/ ESD workstation is requested
during repair process. And Monitor should place on an ESD cloth pad in case of scratch and crack during
repair work. Use Rosh solder paste if you want to repair components.
DIS-2