8.2.
Preparations
To avoid damaging the LCD panel, lay out a soft cloth or towel
and lay down the unit so the front side is facing down.
Precautions when replacing each module
• Always perform the procedure below when replacing each
module.
• Be careful not to overtighten the screws when installing each
module.
8.3.
Pedestal (option) removal
If the pedestal (option) is installed, remove the 2 screws for the
pedestal on each side, and then remove the pedestal.
All manuals and user guides at all-guides.com
17
8.4.
Rear cover removal
First remove the 10 screws on the rear cover, and then remove
the rear cover. (SCR TPG BRZ 4x10)
Boards & Parts location
This unit is designed so that removing the rear cover reveals
the configuration of the boards.
TC-42LF20U / TC-47LF20U