Advertisement
Wall-mount the switch
The bottom panel of the switch includes two mount holes. The center-to-center
distance between the holes is:
•
GS105v5: 1.8 in (46 mm)
•
GS108v4: 3.1 in (80 mm)
1. Mark the wall where you want to drill the holes.
2. Insert the provided anchors into the wall.
3. Install the provided screws with a No. 2 Phillips screwdriver. Leave about ¼ inch (6
mm) of each screw protruding from the wall.
4. Align the holes on the bottom panel of the switch with the screws and mount the
switch.
Technical specifications
Specifications
Network interface
Power adapter
Operating humidity
Specifications
Ports
Power consumption
Weight
Dimensions (W x D x H)
Operating temperature for switch only
Operating temperature for switch
using provided power adapter
Note:
You can mount the switch with the
Ethernet ports facing down (at the bottom) as
shown, or with the Ethernet ports facing up.
Description
RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T
12V @ 0.5A DC input
10%–90% relative humidity, noncondensing
GS105v5
5
2.7W max.
0.56 lb (0.25 kg)
4.0 x 3.7 x 1.1 in.
(101 x 94 x 27 mm)
32–122° F (0–50° C)
32–104° F (0–40° C)
GS108v4
8
4.9W max
1.04 lb (0.47 kg)
6.2 x 4.0 x 1.1 in.
(158 x 102 x 27 mm)
32–104° F (0–40° C)
32–104° F (0–40° C)
Support and Community
Visit
netgear.com/support
to get your
questions answered and access the latest
downloads.
You can also check out our NETGEAR
Community for helpful advice at
netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous
pouvez accéder à ce document en français
canadien à
https://www.netgear.com/
support/download/.
(If this product is sold in Canada, you can
access this document in Canadian French
at
https://www.netgear.com/support/
download/.)
For regulatory compliance information
including the EU Declaration of Conformity,
visit
https://www.netgear.com/about/
regulatory/.
See the regulatory compliance
document before connecting the power
supply.
For NETGEAR's Privacy Policy, visit
www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to
NETGEAR's Terms and Conditions at
https://www.netgear.com/about/terms-and-
conditions. If you do not agree, return the
device to your place of purchase within your
return period.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference
purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
community.
https://
Advertisement
