License Plate Lamp
To replace one of these bulbs, do the following:
1. Turn the lamp assembly counterclockwise and
pull the lamp assembly out of the connector.
2. Pull the old bulb from the lamp assembly,
keeping the bulb straight as you pull it out.
3. Install the new bulb.
4. Reverse Steps 1 through 3 to reinstall the
license plate lamp.
Replacement Bulbs
Exterior Lamp
Back-Up
Front Parking/Turn Signal
License Plate Lamp
Headlamps
High-Beam
Low-Beam
Sidemarker
Stoplamp, Taillamp, and
Turn Signal
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
921
3157NAK
194
H9
H11
194
3057
351