Hoymiles DTU-G100(3Gen) Quick Installation Manual

1. Interface Layout

Item
A
B
C
D

2. Preparation

A) Download the Hoymiles Mobile Installer
App.
B) Check the box for the following items:
- Hoymiles DTU-G100
- Adapter

3. Installation

A) Insert the SIM card into the SIM card slot.
B) Power the DTU-G100 3rd Gen.
Option 1: Connect the DTU to the
adapter and plug it into the wall
socket.
Option 2: Connect the DTU to the
adapter and plug it into the power
strip. Please make sure that it is
placed at least 0.5 meters above the
ground, and try to install the DTU at a
90 degrees angle perpendicular to the
ground.
Note: Please do not install the DTU directly above metal or concrete to prevent signal interference.
C) Start Procedure.
Once the DTU powers on, the red, green and blue lights will flash in sequence for one second each for 30 seconds.

4. Installation Map

Complete the installation map.
A) Peel the serial number label (as circled
below) from the DTU and place it on the
installation map.
B) Complete the system information of the
installation map as shown below.
Region: Global AP040261 REV1.2
Description
USB Connector
Status Indicator
Reset Button
SIM Card Slot
© 2020 Hoymiles Power Electronics Inc. All rights reserved.
DTU-G100(3Gen) Quick Installation Guide
N S E W Panel Group:
(circle one)
Azimuth:
Tilt:
Sheet _ of _
To sheet _______
Customer Information: DTU Serial Number:
To sheet _______
01