Chapter 3 Basics; Introduction; Switching On/ Restart/Switching Off The Mt65 - Newland V/MT65 Beluga Lite User Manual

Introduction

This chapter provides the basics of setting and using the MT65.

Switching On/ Restart/Switching Off the MT65

After installing the SIM card and battery and having the MT65 fully charged, you may switch the terminal on.
Switch the MT65 on: Hold down the Power key on the top-right corner of the terminal until the terminal vibrates. Note that
the initialization is going to take some time before the MT65 displays the Home screen.
Restart the MT65: Hold down the Power key on the top-right corner of the terminal until the window below pops up, then
tap "restart".
Switch the MT65 off: Hold down the Power key on the top-right corner of the terminal until the window below pops up,
then tap "Power off".
13

Chapter 3 Basics