Download Print this page

Genesis Multiple G9F18 AU000 Quick Start Manual page 2

Advertisement

1
A. Open the rear hatch.
B. Remove Cargo Blocks from the packaging.
N
O
T
E
1
A. Open the rear hatch.
B. This product is intended for use on carpeted surfaces only.
N
C. Place Cargo Block(s) on vehicle floor hook side down surrounding the
O
cargo to be restrained. Ensure the weight of the item is on the block face.
T
NOTE: Insufficient weight on the block face may result in unstable Cargo
E
Block(s).
D. Ensure the Cargo Block(s) are properly positioned against the cargo.
WARNING: Unstable cargo could become unbalanced during driving. Place
cargo in the most stable position before driving.
Cargo is most secure when its weight (Max 15 lbs) and center of gravity are
lowest to the ground.
ISHY025
NEW VEHICLE INSTALLATION, PLEASE FOLLOW STEPS BELOW
FOR CUSTOMERS, PLEASE FOLLOW STEPS BELOW OR REFER TO THE QUICK REFERENCE GUIDE
Genuine Accessories
2
A. Place Cargo Blocks on the floor in the shape of a one (1) foot square,
with bottoms facing each other as shown. This is the recommended
N
position for demonstrating this accessory.
O
T
E
2
A. To move Cargo Block(s), lift up vertically until block is disengaged with the
floor, then reposition.
N
O
T
E
WARNING: Cargo Blocks(s) will not restrain cargo during heavy braking or
accident. Unrestrained cargo can cause injury.
Revision Date
04/07/2022
Page 2 of 3

Advertisement

loading
Need help?

Need help?

Do you have a question about the Multiple G9F18 AU000 and is the answer not in the manual?

Subscribe to Our Youtube Channel