Zephyr PRW24F01AG Use, Care And Installation Manual page 11

REMOVING THE SHELVES:
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf towards yourself
4. The shelf has
the post on the right side down while pulling up on the le plas c post. You may choose to do this
by hand or by using a
5. Evenly pull out the shelf from the track
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves
out of their tracks.
Note: The cooler may experience decreased cooling e ciency if air
loaded cabinet.
Note:
INSTALLING ANTI-TIP BRACKET:
1.
2.
3.
it is fully extended outward.
posts on both sides as indicated in the diagram below. While facing the unit, press
ead screwdriver.
it is completely removed from the inner compartment.
6
is restricted due to a fully