Advertisement
Quick Links
Flood Sensor User Manual
HKWL-FLD01W
1. PRODUCT OVERVIEW
HKWL-FLD01W is a smart Flood sensor based on wireless solution. While a
water leak happens or the leak disappears, a notification/alert will be sent to
your APP on your mobile devices. Furthermore, it can be configured as a
trigger associated with some alarm devices based on the same system.
2. PRODUCT FEATURES
Working in 802.11 b/g/n;
Support EZ or AP mode for Wireless connection;
Support water leak detection;
Support battery level detection and low battery alarm;
Support 2xAAA battery powered and low power consumption;
Wall mounted installation with extended detecting cable to 2 meters;
Led indicates the working state;
Compliant with CE, FCC and ROHS;
Advertisement
Related Manuals for HANK Electronics HKWL-FLD01W
Summary of Contents for HANK Electronics HKWL-FLD01W
- Page 1 HKWL-FLD01W 1. PRODUCT OVERVIEW HKWL-FLD01W is a smart Flood sensor based on wireless solution. While a water leak happens or the leak disappears, a notification/alert will be sent to your APP on your mobile devices. Furthermore, it can be configured as a trigger associated with some alarm devices based on the same system.
-
Page 2: Product Structure
PRODUCT STRUCTURE LED Indicator Button Probe Button activities and LED indicator: Press and hold the button for 5 seconds to enter into Wi-Fi connection (or configuration). The red LED indicator will blink rapidly (EZ mode) or slowly (AP mode). EZ mode connection is set as default in Wi-Fi configuration. Press and hold the button for 5 seconds will enable the device switch between EZ mode and AP mode. -
Page 3: Specifications
4. SPECIFICATIONS Power supply 2*AAA battery , 3V Radio frequency 2.4GHz—2.484GHz Radio protocol IEEE802.11 b/g/n 802.11b: +17dBm@11Mbps Transmitting power 802.11g: +15dBm@54Mbps 802.11n: +13dBm@MCS7 802.11b:-91dBm@11Mbps 8%PER 802.11g:-75dBm@54Mbps 10%PER Receiving sensitivity 802.11n:-72dBm@MCS7_HT20 10%PER Working temperature -10 ~ +45℃ Storage temperature -20 ~ +70℃ Relative humidity 8% ~ 90%RH(non-condensing) 5. - Page 4 3) Close the cover and turn it clockwise 5.2 Mount the device on the wall There are 2 methods to mount the device on the wall. 5.2.1 Screw mode 1) Mark the hole location as below figure and drill a hole on the wall accordingly. 2) Screw the two bolts within the package on the wall leaving the around 5~8mm bolt margin out of the wall.
- Page 5 5.2.2 3M Tape mode Install the probe case on the wall with a 3M tape, keep no gap between the probe and floor.
- Page 6 6. APP download and Account binding 6.1 Scan the QR code below to download APP for Android and iOS system. Or you can download the ”Simple Home Connect” APP on Apple Store and Google Play. Android 6.2 Start the APP and register an account with your email address/mobile number (mobile number registration available for China mainland users ONLY), and then log in APP with the registered account 7.
- Page 7 Press and hold the button for 5 seconds and then release,The LED indicator will blink fast in red . Input the password of the designated Wi-Fi network to include the device to Cloud. Waiting for around 60 seconds before the device inclusion process is complete.
- Page 8 7.3 Users can re-name or share the device after Wi-Fi connection is finished. Make sure the device is working in EZ/AP mode, if the APP works in EZ/AP mode. 8. Remove and Reset Device Click “Remove Device”to remove devices,Click “Restore manufacturer Defaults”to reset devices.
- Page 9 9. FCC NOTICE (for USA) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.