Ec Declaration Of Conformity - PROFIX TRYTON TUV12BK2 Operating Instructions Manual

L.dz.: DT-C2/d_zg/0039/01/04.2013
MANUFACTURER:
Person who was authorized to develop technical documentation:
Mariusz Rotuski
This is to confirm that the following products:
CORDLESS DRILL/SCREWDRIVER, by TRYTON; code PROFIX: TUV12BK2 type: D372T12;
CORDLESS DRILL/SCREWDRIVER, by TRYTON; code PROFIX: TUV14BK2 type: D372T14;
CORDLESS DRILL/SCREWDRIVER, by TRYTON; code PROFIX: TUV18BK2 type: D372T18;
meet essential requirement included into the following Directives of the European Parliament and the Council:
2006/42/EC of 17 May 2006 on machinery, and amending Directive 95/16/EC (Official Journal of the EU L 157 of 9
June 2006, p. 24, as amended);
2004/108/EC of 15 December 2004 on the approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive 89/336/EEC (Official Journal of the EU L 390 of 31 December
2004, p. 24-37as amended);
2011/65/EU of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (Official Journal of the EU L
and have been manufactured in accordance with the standards:
EN 60745-1:2009+A11:2010 EN 60745-2-1:2010 EN 60745-2-2:2010
EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:1997+A1:2001+A2:2008
Mariusz Rotuski
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.

EC DECLARATION OF CONFORMITY

PROFIX Co. Ltd., 34 Marywilska Street, 03-228 Warsaw Poland
, Trade and Distribution Centre PROFIX, 3, Dobra St., Łomna Las, 05-152 Czosnów
12 V d.c.; n = 0-400/0-1200 rpm; 10 mm
o
14,4 V d.c.; n = 0-400/0-1200 rpm; 10 mm
o
18 V d.c.; n = 0-400/0-1200 rpm; 10 mm
o
174 of 01.07.2011, p. 88;
This declaration of conformity is issued under the sole responsibility of the manufacturer;
ø
ø
ø
8
Łomna Las, 2013.04.09