Truss Rod Cover / Truss Rod Adjustment - Warwick Alien Acoustic Bass Manual

2) Truss Rod Cover / Truss Rod Adjustment

Truss Rod Cover:
The truss rod cover of an Alien acoustic bass gives you - when needed - quick access to the truss rod.
You'll need a flat screwdriver to unlock the integrated latch mechanism.
Truss rod adjustment:
A neck is set up correctly if it has a slight forward bow. You can easily verify this by pressing the lowest
string at the 1st and last fret and measuring the distance between the fret and the string at the 7th fret:
it should read between 0.06" and 0.02" . This value is independent from the action (height) setup of each
individual string.
Turning the truss rod key clockwise (direction A) will tighten the truss rod and give the neck a back bow.
Turning the truss rod key counterclockwise (direction B) will loosen the truss rod and give the neck a
forward bow. These adjustments should be done in small steps because the neck's reaction is not in-
stantaneous. You should check the results after approximately one hour and probably check again the
following day. Readjust the truss rod if needed.
A change in humidity, particularly during the changing of seasons or during strong weather fluctuations,
is when one should pay attention to the neck's setup and the corresponding truss rod adjustment.
direction A = neck with a back bow
direction B = neck with an up bow
7