Other Functions; How To Use Temperature Control 9 Steps; Door Alarm And Eco Alarm Function; Quick Cooling - Hitachi R-WB640VGV0 Instruction Manual

No frost
Table of Contents

Advertisement

Available languages

Available languages

Other Functions

How to use temperature control 9 step
Setting
Pi!
1,2,..5 Seconds
Peep!
Touch "Refrigerator"
for 2 seconds until
1 "Peep!" sound is heard.
Cancel
Pi!
1,2,..5 Seconds
PiPi!
2

Door Alarm and ECO Alarm Function

If the door is left open for more than 1 minute, the alarm system
will inform the user by the sound and digital display.
● Door Alarm: Informs by PeepPeepPeep sound.
● Eco Alarm Display: Indicates the door opening state on the control panel.
To Disactivate Alarm and Sound
1. Keep touching "Ice Maker"
for 5 seconds until
"Peep!" sound is heard.
Pi!
1,2,..5 Second
Peep!
● Factory setting, the alarm and sound are set "ON"
NOTICE
● If the Door Alarm, Eco Alarm Display and each button operation sound have been deactivated, The refrigerator will still set
(There must set more than 45 seconds before unplug the power or power failure. otherwise the temperature display shown as before setting.)

Quick Cooling

3
Tuoch
1
"Refrigerator"
button, and start
operation of
"Quick Cooling".
Pi!
1,2 Seconds
Peep!
● During defrost period,"Quick Cooling" operation will stop even though the lamp is on. After finishing defrost period, the operation
NOTICE
will restart automatically.
● Please note "Quick Cooling" mode will be released after power cut off or unplug.
4

Quick Freezing

1
Pi!
1,2 Seconds
Peep!
6
Open the Freezer door or Selectable Zone door before touch "Refrigerator" to setting.
Each time you touch the button, the corresponding indicator lamp changes in order shown below (9 steps).
(
Lighting
Blinking
Indication
lamp
Setting
Cold
Sound
Pi!
Open the Freezer door or Selectable Zone door before touch "Refrigerator" to cancel.
you can set temperature by normal step ( 5 steps)
Touch "Refrigerator"
for 5 seconds until 1 "PiPi!"
sound is heard.
There is not sound when
touching any button
(deactive door alarm sound).
the alarm and sound to "OFF" even though a power failure or when unplugging and reconnecting the power plug.
When you want to cool food or drinks quickly, use this function
2
When you want to freeze food or make ice quickly, use this function
2
Tuoch "Freezer"
botton, and start
operation of
"Quick Freezing".
(Refrigerator compartment/ Freezer Compartment)
Turned off )
Normal
Pi!
Pi!
Pi!
PiPi!
NOTICE
This function is subjected to change according model type.
Factory setting, the adjustment temperature by normal step ( 5 steps).
After 1 minute
After 2 minute
After 3 minute
1. Keep touching " Ice Maker "
for 5 seconds until "PiPi!" sound
is heard.
....
To stop this function
before it is completed,
touch "Refrigerator"
again.
Pi!
"Quick Cooling" will
1,2 Seconds
be finished automaically
Peep!
in approximately 90 minutes.
Tuoch again "Freezer"
and stop the
operation.
Pi!
"Quick Freezing" will
1,2 Seconds
be finished automaically
Peep!
in approximately 2 hours.
Coldest
Pi!
Pi!
Pi!
PeepPeepPeep
PeepPeepPeepPeepPeep
Peep continuously
To re-activate Alarm and Sound
There is sound when touching
any button
(active door alarm sound).
....
1,2,..5 Seconds
PiPi!
Put food on the quick cooling
"Quick cooling" corner is
located on the upper part of
the refrigerator compartment.
"Quick Cooling" is more
effective if food is place near
the back wall of the
refrigerator compartment.
NOTICE
● During "Quick Freezing", priority cooling
of the freezer compartment will be done,
Thus, try to avoid unnecessary opening
and closing the doors not to have a
temperature rise of the refrigerator
compartment.
Pi!
All LED on display-
are Flashing
Pi!

Advertisement

Table of Contents
loading

Table of Contents