M-Lok™ Rails - Unity MARK 2.0 Installation Instructions

WARNING: Over-torquing fasteners can damage your mount and will not be covered by warranty.
M-LOK™ Rails
The M-LOK™ MARK 2.0 Accessory Kit is sold
separately.
1
Install the M-LOK™ Nuts and 10-24 x 3/8 screws
included in the MARK 2.0 M-LOK™ Accessory Kit
through the MARK 2.0 body.
2
Secure MARK 2.0 assembly to M-LOK™ helmet
rail using normal M-LOK™ mounting procedures.
Lightly snug both screws before applying torque to
either. DO NOT EXCEED 10 IN-LBS.
©Copyright 2020, UNITY Tactical. All Rights Reserved.
1