Subscribe to Our Youtube Channel
Related Manuals for INVISIBLE FENCE Indoor Micro Shields
Summary of Contents for INVISIBLE FENCE Indoor Micro Shields
- Page 1 Indoor Micro Shields® Unit Owner’s Manual and Operating Guide My Invisible Fence® Brand Dealer: Name: Phone: InvisibleFence.com | 800-578-3647...
-
Page 2: Important Precautions
• The Indoor Micro Shields solution gives you control over the areas a pet or pets have access to inside your home. It is designed to work independently or to complement your Invisible Fence® Brand 800 Series and/or Boundary Plus®... -
Page 3: Table Of Contents
Congratulations on your purchase of the Indoor Micro Shields® Plus. Please read and review this entire manual to become familiar with Indoor Shields Plus solution components and its operation. It is strongly recommended you review this information before using the product. -
Page 4: Components
ON and OFF during normal use. • One for use when programming the Computer Collar unit to the Indoor Micro Shields transmitter. The LCD display shows the signal field range and Channel A, Channel B, or Channels A and B mode. -
Page 5: Operating Guide
Computer Collar® unit when turning ON or adjusting the Indoor Micro Shields® transmitter. 1. Charge the Indoor Micro Shields® Transmitter • Lift the rubber cover protecting the charging jack located on the Indoor Micro Shields transmitter. Connect the charger connector to the charging jack with the marked side facing up. Illustration A Indoor Micro Shields®... -
Page 6: Adjust Signal Field Range
• Holding the Computer Collar® unit at the height of your pet’s neck, start outside the range and move slowly towards the Indoor Micro Shields transmitter. Do not touch the correction posts at this time. • The Computer Collar unit will beep as it approaches the outer range of the signal field width set in Step 2. -
Page 7: Multi Area Avoidance
When set to Channel B (CH.B), the Indoor Micro Shields transmitter denies access to pets wearing a Computer Collar unit programmed to Channel B. • When set to Channel A-B (CH. A and CH.B), the Indoor Micro Shields transmitter denies access to all pets wearing a Computer Collar unit. Programming the Computer Collar® Unit... -
Page 8: Troubleshooting
• Check/replace the Power Cap® Battery in the Computer Collar® unit. • The Indoor Micro Shields® transmitter power could be completely drained. Apply power to the Indoor Shields® Plus transmitter using the AC adapter to verify operation. • If using AC adapter for power, check connections. -
Page 9: Battery Disposal
Consult the dealer, or an experienced radio/TV was purchased so it can be placed in our recycling technician for help. system. If this is not possible, please contact your Invisible Fence Brand Dealer. ® This Class B digital apparatus complies with Canadian RSS-210. - Page 10 800-578-3647 (USA) 865-777-5404 (International) 400-1662-2 ©2019 Radio Systems Corporation® All rights reserved. Protected by Patents: U.S.: 7,046,152, 7,068,174, 7,117,822, 7,204,204, 7,278,376, 7,495,570 and 8,342,135 InvisibleFence.com...
Need help?
Do you have a question about the Indoor Micro Shields and is the answer not in the manual?
Questions and answers