Page 2
Invisible Fence Brand pet containment system. ® The Surge Protector is designed to protect your Invisible Fence Brand pet containment system from surges or spikes that can reach it via your AC power connection and/or your buried Boundary Wire.
Page 3
CAUTION: • To reduce the risk of electrical shock, disconnect power to the receptacle (outlet) before installing or removing the Surge Protector. When removing receptacle cover screw, cover may fall across plug pins or receptacle may become dislodged. • Use only with a duplex receptacle having a center screw. •...
Page 4
Protector. LP Supplemental: In 2004 Invisible Fence Brand designed a new transient voltage surge suppressor (TVSS). If your system was installed prior to July of 2004, you may have an older style lightning protection device. Please follow the instructions below when upgrading to the LP4100 or LP4200 lightning protection device.
Page 5
NOTE: Additional twisted wire may be required when upgrading to this new lightning protection device. If additional wire was not included in your kit, please notify your local Invisible Fence Brand dealer. CAUTION: Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel.
Need help?
Do you have a question about the LP4100 and is the answer not in the manual?
Questions and answers