Table of Contents
Advertisement
Safety instructions
1
Safety instructions
1.1
General safety instructions
1.2
Safety with electrical connections
1.3
Preventing connection errors
Connection plan PMCtendo SZ – HIPERFACE DSL
1004737-en-US-03
WARNING!
Injury due to moving or rotating parts!
Burns due to contact with hot surfaces!
▪ Only connect the motor while observing the following safety
instructions, the associated operating manual and any applicable
national, local or system-specific regulations.
DANGER!
Electric shock!
Serious injuries due to contact with live parts!
▪ Carry out all work on a de-energized motor!
▪ Make sure that the motor shaft is stationary during all work. A rotating
rotor can cause high voltages at the connections.
▪ Disconnect the supply voltage. Be aware that there may still be
dangerously high voltages at the servo amplifier, even 10 minutes after
switching off the supply voltage, due to the residual charge of the link
capacitors.
▪ Cover all open electrical connections, e.g. using protective caps.
▪ Secure the installation location as per regulations, e.g. using locks or
warning signs.
ATTENTION!
Damage to the motor or motor components due to electrical
connection errors!
▪ Observe the motor nameplate and this connection plan. Contact
Technical Support in case of questions.
3
Advertisement
Table of Contents
