Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Pilz HIPERFACE DSL
- Page 1 PMCtendo SZ – HIPERFACE DSL Connection plan-1004737-en-US-03...
-
Page 2: Table Of Contents
Preventing connection errors......................3 Safe functions and EMC of the drive system................... 4 Connection – Motor housing to grounding conductor system..........5 HIPERFACE DSL power and feedback plug connectors ............6 Terminal assignment – HIPERFACE DSL plug connectors ............7 Appendix ............................9 Trademarks............................ -
Page 3: Safety Instructions
Preventing connection errors ATTENTION! Damage to the motor or motor components due to electrical connection errors! ▪ Observe the motor nameplate and this connection plan. Contact Technical Support in case of questions. Connection plan PMCtendo SZ – HIPERFACE DSL 1004737-en-US-03... -
Page 4: Safe Functions And Emc Of The Drive System
Any warranty claims shall be void under these circumstances. ▪ Use connection cables or servo amplifiers from Pilz GmbH & Co. that are appropriate for the motor. Connection plan PMCtendo SZ – HIPERFACE DSL... -
Page 5: Connection - Motor Housing To Grounding Conductor System
The grounding screw of the motor is identified with symbol as per IEC 60417-DB. The cross-section of the grounding conductor has to be at least as large as the cross-section of the lines in the power connection. Connection plan PMCtendo SZ – HIPERFACE DSL 1004737-en-US-03... -
Page 6: Hiperface Dsl Power And Feedback Plug Connectors
HIPERFACE DSL power and feedback plug connectors HIPERFACE DSL power and feedback plug connectors Single-cable HIPERFACE DSL technology combines the power and feedback connections into one common plug connector. In motors with forced ventilation, avoid collisions between the motor connection cables and the plug connector of the forced ventilation unit. -
Page 7: Terminal Assignment - Hiperface Dsl Plug Connectors
The temperature sensor of the motor is connected to the feedback system internally. The measured values from the temperature sensor are transmitted via the HIPERFACE DSL log of the feedback system. The size of the plug connector depends on the size of the motor; the terminal assignment changes depending on the connector size. - Page 8 HIPERFACE DSL power and feedback plug connectors HIPERFACE DSL – con.40 plug connectors Connection diagram Connection Color black blue 1BR+ (brake + DC 24 V) − 1BR− (brake 0 V) black DSL+ (H) grey DSL− (L) green green-yellow a) Coaxial shield to which the DSL shield is connected Connection plan PMCtendo SZ –...
-
Page 9: Appendix
All other trademarks not listed here are the property of their respective owners. Products that are registered as trademarks are not specially indicated in this documentation. Existing property rights (patents, trademarks, protection of utility models) are to be observed. Connection plan PMCtendo SZ – HIPERFACE DSL 1004737-en-US-03... - Page 10 Support Technical support is available from Pilz round the clock. Americas Australia Scandinavia Brazil +61 3 95600621 +45 74436332 +55 11 97569-2804 Spain Canada Europe +34 938497433 +1 888-315-PILZ (315-7459) Austria Switzerland Mexico +43 1 7986263-0 +41 62 88979-30 +52 55 5572 1300...