Chevrolet 2009 Traverse Owner's Manual page 226

3-106 Instrument Panel
Storing Name Tags
The system can store up to thirty
phone numbers as name tags
that are shared between the
Bluetooth and OnStar systems.
The system uses the following
commands to store and retrieve
phone numbers:
•
Store
•
Digit Store
•
Directory
Using the Store Command
The store command allows a phone
number to be stored without entering
the digits individually.
b g
1. Press and hold
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Store". The system
responds with "Store, number
please" followed by a tone.
3. Say the complete phone number
to be stored at once with no
pauses.
•
If the system recognizes
the number it responds with
"OK, Storing" and repeats the
phone number.
•
If the system is unsure it
recognizes the phone number,
it responds with "Store" and
repeats the number followed
by "Please say yes or no".
If the number is correct, say
"Yes". If the number is not
correct, say "No". The system
for
will ask for the number to be
re-entered.
4. After the system stores the
phone number, it responds
with "Please say the name tag"
followed by a tone.
5. Say a name tag for the
phone number. The name
tag is recorded and the system
responds with "About to store
<name tag>. Does that
sound OK?".
•
If the name tag does not sound
correct, say "No" and repeat
Step 5.
•
If the name tag sounds
correct, say "Yes" and the
name tag is stored. After the
number is stored the system
returns to the main menu.