Download Print this page

Primera SAFEHINGE JUNIOR-RHINO PR-6308-BR-LL Manual

Locking for slave leaf doors

Advertisement

Quick Links

D) Installing lock in the foot of the door
Note: Before begining the installation of the lock in the foot
of the door it is important that the followers on the top
and the bottom lock are in alignment.
1) Remove the door before fitting the lock.
2) Mark the installation position on the foot of the door.
Diagram 12.
3) Carefully prepare a mortice pocket 85mm x 85mm. Take
care to ensure the mortice is positioned centrally in the
door shown at Diagram 13
4) Ensure all debris is removed and check the lock sits
comfortably in the hole all the way to the back of the
fore-end without force.
5) With the bolt extended and the square face plate in
position, mark a pencil line around the face-plate as
shown at Diagram 14. Remove lock and set aside.
6) Using a chisel, remove 4mm of timber inside the pencil
lines as shown Diagram 15 to allow the front of the face
plate to sit flush with the surface of the timber when
lock is in position.
E) Fitting the Escutcheon Assembly
1) Follow installation procedure B illustrated overleaf.
2) Re-hang the door before fitting the strike plate.
F) Fitting the Flat Strike Plate
1) The procedure C overleaf can be used as a general
guide when fitting a strike plate to timber floor.
Junior-Rhino
For further details please contact
Primera Limited, Unit 8 Bankfield House, 250 Bristol Avenue, Blackpool, FY2 0JF
t 0330 058 0988 f 01253 508652
e info@safehingeprimera.com w www.safehinge.com
All rights reserved © 2015 Primera Ltd
50
135
12
13
44
18mm
14
15
SOP094 Revision (1)
b
a) 76mm (3") Deadbolt C/W Face Plate & Strike Plate
b) 4 x 1¼" No 8 Lock and Strike Plate Fixing Screws
c) 70mm x 70mm Escutcheon Plate Assembly
d) 4 x 5/8" x No 6 Escutcheon Plate Fixing Screws
e) Life-Line Escutcheon C/W 8mm Spindle & Grub Screw
f)
2 x M4 x 16 Escutcheon Fixing Machine Screws
Important Note: Primera products are protected by Intellectual Property Rights including UK and Community Unregistered Design Rights,
UK and Community Registered Designs and UK patents and patent applications.
Junior-Rhino
Locking for Slave Leaf Doors
(PR-6308-BR-LL)
a
c
d
e
(Key Not Included In Kit)
Part No. PR-7320-LLZ-BK
Contents List
LL
f

Advertisement

loading

Summary of Contents for Primera SAFEHINGE JUNIOR-RHINO PR-6308-BR-LL

  • Page 1 2 x M4 x 16 Escutcheon Fixing Machine Screws e info@safehingeprimera.com w www.safehinge.com All rights reserved © 2015 Primera Ltd Important Note: Primera products are protected by Intellectual Property Rights including UK and Community Unregistered Design Rights, UK and Community Registered Designs and UK patents and patent applications.
  • Page 2 Tools Required 3) Using the spindle formula in figure (7) cut the spindle to the Spindle Formula required length, taking care not to trim the end with the through Door Thickness ÷ 2 + 7mm = Spindle Lgth hole. Align the spindle in the escutcheon assembly and secure a) Drill Hex Socket Screwdriver using grub screw supplied.