Preparation For Work - ulsonix USX-ST4 User Manual

12. Brush - attachment for the steam head
3.2.

Preparation for work

LOCATION OF THE DEVICE
The ambient temperature should not exceed 40°C and the relative humidity
should not exceed 85%. Position the device in a way that allows for good air
circulation. Maintain a minimum distance of 10 cm from any wall. Keep the device
away from any hot surfaces. Always operate the device on a level, stable, clean,
fireproof and dry surface and out of the reach of children and persons with
reduced mental, sensory and intellectual abilities. Position the device in such a
way that the power supply plug can be reached at any time. Make sure that the
device's power supply corresponds to the data on the rating plate!
ASSEMBLY OF THE DEVICE
Caution: It is forbidden to assemble the device when it is connected to the power
supply or is still hot after previous use.
1. Assemble the telescopic tube. Connect the tubes by turning them clockwise.